Prisijungti

web camera

  • 8 Kov '06

Sveiki, gavau logitech web camera.
Prijungiau prie USB jungites, atsisiunciau kazkokius qc-usb driverius, bet norint paleisti ta kamera visas PC uzstringa ir tenka perkraut. Gal galit patart ka daryt? Kaip istaisyt problema ir teisingai sukofiguruoti parametrus? Naudoju ubuntu, KDE desktop.

  • 9 Kov '06

Vot man irgi reikia panasios pagalbos bet as netgi nemoku irasyti tu draiveriu

  • 17 Geg '08

hm... na va o man ji aukstyn kojom rodo

  • 27 Vas '09

kazka radau http://ubuntuforums.org/showthread.php?t=634393 tik ne suprantu kaip tais kodais pasinaudot. dar dmesg suprantu parodo koki web kameros draiveriai.pas mane gspca.butu gerai kad kas paaiskintu tai lietuviskai

  • 27 Vas '09

nelabai suprantu kodel komandoje trys eilutes ir ka ji padaro myrelease=uname -r
olddriver=locate -r "/$myrelease/.*gspca\.ko$"
sudo mv $olddriver "/home/$USER/gspca.old"

hmx
  • 27 Vas '09

uname -r [\b] parodo tavo linux versija rodos pats gali isbandyti nieko blogo neatsitiks tiesiog informacija
[b]locate ... cia suranda diske esancius failus
sudo mv ...kopijuoja is vienos vietos i kita, siuo atveju padaro atsargines kopijas.

dmesg operacines sistemos ivairus pranesimai pradedant nuo krovimosi iki tarkim ivairiu irenginiu pajungimo, bei ivairiu klaidu

hmx
  • 27 Vas '09

locate komanda kartais reikalauja pries tai atnaujinti paieskos "duomeneu baze"
tai atliekama su komanda rodos
sudo updatedb

  • 27 Vas '09

@zygintas
Ten skriptas, kurį išsisaugai į tekstinį failą. Paskui per properties nusistatai, kad jis būtų paleidžiamas (executable) ir pasileidi jį.

  • 28 Vas '09

ivedes komanda matau zygis@zygis-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] Entering addactive_range(0, 0, 65520) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65520
[ 0.000000] HighMem 65520 -> 65520
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65520
[ 0.000000] On node 0 totalpages: 65520
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 479 pages used for memmap
[ 0.000000] Normal zone: 60945 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6BB0 checksum 0
[ 0.000000] ACPI: RSDP 000F6BB0, 0014 (r0 VIA694)
[ 0.000000] ACPI: RSDT 0FFF3000, 0028 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 0FFF3040, 0074 (r1 VIA694 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 0FFF30C0, 3493 (r1 VIA694 AWRDACPI 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 0FFF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:efff0000)
[ 0.000000] Built 1 zonelists. Total pages: 65009
[ 0.000000] Kernel command line: root=UUID=c214d798-4589-4edb-933c-65b96ca55898 ro quiet splash locale=lt_LT
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 1466.820 MHz processor.
[ 21.172507] Console: colour VGA+ 80x25
[ 21.172743] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.172906] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 21.182234] Memory: 247948k/262080k available (2015k kernel code, 13676k reserved, 916k data, 364k init, 0k highmem)
[ 21.182248] virtual kernel memory layout:
[ 21.182250] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 21.182252] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.182254] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 21.182255] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 21.182257] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 21.182259] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 21.182261] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 21.182265] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.182324] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 21.262335] Calibrating delay using timer specific routine.. 2936.19 BogoMIPS (lpj=5872399)
[ 21.262378] Security Framework v1.0.0 initialized
[ 21.262387] SELinux: Disabled at boot.
[ 21.262409] Mount-cache hash table entries: 512
[ 21.262593] CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000
[ 21.262607] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 21.262611] CPU: L2 Cache: 256K (64 bytes/line)
[ 21.262615] CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000
[ 21.262632] Compat vDSO mapped to ffffe000.
[ 21.262649] Checking 'hlt' instruction... OK.
[ 21.278509] SMP alternatives: switching to UP code
[ 21.278837] Freeing SMP alternatives: 11k freed
[ 21.279308] Early unpacking initramfs... done
[ 21.722548] ACPI: Core revision 20070126
[ 21.722671] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 21.724412] ACPI: setting ELCR to 0200 (from 0a20)
[ 21.726182] CPU0: AMD Athlon(tm) XP 1700+ stepping 02
[ 21.726194] SMP motherboard not detected.
[ 21.726198] Local APIC not detected. Using dummy APIC emulation.
[ 21.726284] Brought up 1 CPUs
[ 21.726468] Booting paravirtualized kernel on bare hardware
[ 21.726563] Time: 14:02:33 Date: 01/27/109
[ 21.726603] NET: Registered protocol family 16
[ 21.726739] EISA bus registered
[ 21.726756] ACPI: bus type pci registered
[ 21.727748] PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
[ 21.727751] PCI: Using configuration type 1
[ 21.727754] Setting up standard PCI resources
[ 21.740183] ACPI: EC: Look up EC in DSDT
[ 21.744260] ACPI: Interpreter enabled
[ 21.744265] ACPI: (supports S0 S1 S4 S5)
[ 21.744286] ACPI: Using PIC for interrupt routing
[ 21.749797] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.749813] PCI: Probing PCI hardware (bus 00)
[ 21.750501] ACPI: PCI Interrupt Routing Table [_SB
.PCI0._PRT]
[ 21.766673] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
[ 21.766826] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
0, disabled.
[ 21.767000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 12 14 15)
[ 21.767172] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10
11 12 14 15)
[ 21.767284] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.767302] pnp: PnP ACPI init
[ 21.767320] ACPI: bus type pnp registered
[ 21.771288] pnp: PnP ACPI: found 15 devices
[ 21.771292] ACPI: ACPI bus type pnp unregistered
[ 21.771297] PnPBIOS: Disabled by ACPI PNP
[ 21.771377] PCI: Using ACPI for IRQ routing
[ 21.771381] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.793889] NET: Registered protocol family 8
[ 21.793892] NET: Registered protocol family 20
[ 21.793988] pnp: 00:00: iomem range 0xda000-0xdbfff has been reserved
[ 21.793992] pnp: 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 21.793996] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 21.794000] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 21.794247] Time: tsc clocksource has been installed.
[ 21.824458] PCI: Bridge: 0000:00:01.0
[ 21.824461] IO window: disabled.
[ 21.824467] MEM window: e0000000-e1ffffff
[ 21.824472] PREFETCH window: d8000000-dfffffff
[ 21.824491] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.824510] NET: Registered protocol family 2
[ 21.862313] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 21.862383] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[ 21.862576] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 21.862706] TCP: Hash tables configured (established 8192 bind 8192)
[ 21.862709] TCP reno registered
[ 21.874414] checking if image is initramfs... it is
[ 22.326198] Switched to high resolution mode on CPU 0
[ 22.717558] Freeing initrd memory: 7545k freed
[ 22.718130] audit: initializing netlink socket (disabled)
[ 22.718149] audit(1235743354.116:1): initialized
[ 22.720690] VFS: Disk quotas dquot_6.5.1
[ 22.720772] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.720904] io scheduler noop registered
[ 22.720908] io scheduler anticipatory registered
[ 22.720911] io scheduler deadline registered
[ 22.720929] io scheduler cfq registered (default)
[ 22.720946] PCI: VIA PCI bridge detected. Disabling DAC.
[ 22.720986] Boot video device is 0000:01:00.0
[ 22.721197] isapnp: Scanning for PnP cards...
[ 23.074994] isapnp: No Plug & Play device found
[ 23.114764] Real Time Clock Driver v1.12ac
[ 23.114895] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.115005] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.115333] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.116327] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 23.116798] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 23.118057] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.118371] input: Macintosh mouse button emulation as /class/input/input0
[ 23.118489] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 23.118838] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.118845] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.119083] mice: PS/2 mouse device common for all mice
[ 23.119233] EISA: Probing bus 0 at eisa.0
[ 23.119256] Cannot allocate resource for EISA slot 4
[ 23.119274] EISA: Detected 0 cards.
[ 23.119516] TCP cubic registered
[ 23.119530] NET: Registered protocol family 1
[ 23.119557] Using IPI No-Shortcut mode
[ 23.119774] Magic number: 13:449:31
[ 23.119789] hash matches device ttyde
[ 23.120581] Freeing unused kernel memory: 364k freed
[ 23.166095] input: AT Translated Set 2 keyboard as /class/input/input1
[ 24.417609] AppArmor: AppArmor initialized<5>audit(1235743356.116:2): type=1505 info="AppArmor initialized" pid=1175
[ 24.426661] fuse init (API version 7.8)
[ 24.433157] Failure registering capabilities with primary security module.
[ 24.447316] ACPI: Fan [FAN] (on)
[ 24.453969] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 24.453978] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 24.455591] ACPI: Thermal Zone [THRM] (40 C)
[ 25.230045] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 25.230090] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 25.230095] 8139cp 0000:00:0a.0: Try the "8139too" driver instead.
[ 25.232572] 8139too Fast Ethernet driver 0.9.28
[ 25.233063] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 25.233068] PCI: setting IRQ 5 as level-triggered
[ 25.233074] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 25.233467] eth0: RealTek RTL8139 at 0xd0816000, 00:40:f4:b3:e5:e3, IRQ 5
[ 25.233471] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 25.267827] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 25.267836] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 25.268755] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 25.269270] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 25.269276] PCI: setting IRQ 11 as level-triggered
[ 25.269281] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 25.269290] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
[ 25.269319] VP_IDE: chipset revision 6
[ 25.269322] VP_IDE: not 100% native mode: will probe irqs later
[ 25.269337] VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 25.269347] ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
[ 25.269364] ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
[ 25.269373] Probing IDE interface ide0...
[ 25.295811] usbcore: registered new interface driver usbfs
[ 25.295851] usbcore: registered new interface driver hub
[ 25.295890] usbcore: registered new device driver usb
[ 25.297113] USB Universal Host Controller Interface driver v3.0
[ 25.469073] Floppy drive(s): fd0 is 1.44M
[ 25.533825] FDC 0 is a post-1991 82077
[ 4.496000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.500000] Time: acpi_pm clocksource has been installed.
[ 4.508000] hda: ExcelStor Technology J880, ATA DISK drive
[ 5.180000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.192000] Probing IDE interface ide1...
[ 6.056000] hdc: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
[ 6.840000] hdd: LITE-ON DVDRW LH-20A1P, ATAPI CD/DVD-ROM drive
[ 6.896000] ide1 at 0x170-0x177,0x376 on irq 15
[ 6.920000] SCSI subsystem initialized
[ 6.928000] libata version 2.21 loaded.
[ 6.932000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 6.932000] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 6.932000] uhci_hcd 0000:00:11.2: UHCI Host Controller
[ 6.932000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1
[ 6.932000] uhci_hcd 0000:00:11.2: irq 11, io base 0x0000d800
[ 6.932000] usb usb1: configuration #1 chosen from 1 choice
[ 6.932000] hub 1-0:1.0: USB hub found
[ 6.932000] hub 1-0:1.0: 2 ports detected
[ 6.944000] hda: max request size: 512KiB
[ 6.964000] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
[ 6.964000] hda: cache flushes supported
[ 6.964000] hda: hda1 hda2 < hda5 >
[ 7.012000] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
[ 7.012000] Uniform CD-ROM driver Revision: 3.20
[ 7.016000] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 7.036000] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 7.036000] uhci_hcd 0000:00:11.3: UHCI Host Controller
[ 7.036000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 2
[ 7.036000] uhci_hcd 0000:00:11.3: irq 11, io base 0x0000dc00
[ 7.036000] usb usb2: configuration #1 chosen from 1 choice
[ 7.036000] hub 2-0:1.0: USB hub found
[ 7.036000] hub 2-0:1.0: 2 ports detected
[ 7.276000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 7.320000] Attempting manual resume
[ 7.320000] swsusp: Resume From Partition 3:5
[ 7.320000] PM: Checking swsusp image.
[ 7.320000] PM: Resume from disk failed.
[ 7.372000] kjournald starting. Commit interval 5 seconds
[ 7.372000] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.464000] usb 1-1: configuration #1 chosen from 1 choice
[ 15.224000] Linux agpgart interface v0.102 (c) Dave Jones
[ 15.260000] Linux video capture interface: v2.00
[ 15.296000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.296000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.320000] agpgart: Detected VIA KT266/KY266x/KT333 chipset
[ 15.328000] agpgart: AGP aperture is 128M @ 0xd0000000
[ 15.408000] bttv: driver version 0.9.17 loaded
[ 15.408000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 15.408000] bttv: Bt8xx card found (0).
[ 15.408000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 15.408000] bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 11, latency: 32, mmio: 0xe2000000
[ 15.408000] bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
[ 15.408000] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected]
[ 15.408000] bttv0: gpio: en=00000000, out=00000000 in=00bfff06 [init]
[ 15.408000] bttv0: using tuner=5
[ 15.408000] bttv0: i2c: checking for MSP34xx @ 0x80... <7>irda_init()
[ 15.508000] NET: Registered protocol family 23
[ 15.740000] not found
[ 15.740000] bttv0: i2c: checking for TDA9875 @ 0xb0... <6>input: PC Speaker as /class/input/input2
[ 16.580000] not found
[ 16.580000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 16.684000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[ 16.988000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[ 17.000000] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 17.004000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 17.004000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 17.128000] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 17.128000] tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 17.128000] tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 17.376000] bttv0: registered device video0
[ 17.376000] bttv0: registered device vbi0
[ 17.376000] bttv0: registered device radio0
[ 17.376000] bttv0: PLL: 28636363 => 35468950 .. ok
[ 17.408000] input: bttv IR (card=34) as /class/input/input4
[ 17.476000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 17.476000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 17.488000] bt878: AUDIO driver version 0.0.0 loaded
[ 17.772000] usbcore: registered new interface driver gspca
[ 17.772000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 17.884000] usbcore: registered new interface driver snd-usb-audio
[ 18.012000] bt878: Bt878 AUDIO function found (0).
[ 18.012000] ACPI: PCI Interrupt 0000:00:08.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 18.012000] bt878_probe: card id=[0x6606107d], Unknown card.
[ 18.012000] Exiting..
[ 18.012000] ACPI: PCI interrupt for device 0000:00:08.1 disabled
[ 18.012000] bt878: probe of 0000:00:08.1 failed with error -22
[ 18.048000] ACPI: PCI Interrupt 0000:00:08.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 18.680000] lp0: using parport0 (interrupt-driven).
[ 18.748000] Adding 738948k swap on /dev/hda5. Priority:-1 extents:1 across:738948k
[ 19.112000] EXT3 FS on hda1, internal journal
[ 20.548000] No dock devices found.
[ 20.788000] input: Power Button (FF) as /class/input/input5
[ 20.796000] ACPI: Power Button (FF) [PWRF]
[ 20.852000] input: Power Button (CM) as /class/input/input6
[ 20.856000] ACPI: Power Button (CM) [PWRB]
[ 20.912000] input: Sleep Button (CM) as /class/input/input7
[ 20.920000] ACPI: Sleep Button (CM) [SLPB]
[ 22.680000] eth0: link down
[ 23.096000] ppdev: user-space parallel port driver
[ 23.256000] audit(1235743376.446:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4695 profile="/usr/sbin/cupsd"
[ 25.020000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 25.020000] apm: overridden by ACPI.
[ 28.748000] Failure registering capabilities with primary security module.
[ 28.780000] NET: Registered protocol family 10
[ 28.780000] lo: Disabled Privacy Extensions
[ 28.780000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.344000] Bluetooth: Core ver 2.11
[ 31.344000] NET: Registered protocol family 31
[ 31.344000] Bluetooth: HCI device and connection manager initialized
[ 31.344000] Bluetooth: HCI socket layer initialized
[ 31.376000] Bluetooth: L2CAP ver 2.8
[ 31.376000] Bluetooth: L2CAP socket layer initialized
[ 31.592000] Bluetooth: RFCOMM socket layer initialized
[ 31.592000] Bluetooth: RFCOMM TTY layer initialized
[ 31.592000] Bluetooth: RFCOMM ver 1.8
[ 121.544000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 121.544000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 124.364000] NET: Registered protocol family 17
[ 132.192000] eth0: no IPv6 routers present
[ 151.380000] eth0: link down
[ 153.056000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 153.056000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 163.580000] eth0: no IPv6 routers present
[ 181.048000] eth0: no IPv6 routers present
[ 2564.564000] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 4596.432000] usbcore: deregistering interface driver gspca
[ 4596.436000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: driver gspca deregistered
[ 4692.880000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: USB SPCA5XX camera found.(ZC3XX)
[ 4693.520000] usbcore: registered new interface driver gspca
[ 4693.520000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 9534.112000] usbcore: registered new interface driver uvcvideo
[ 9534.112000] USB Video Class driver (v0.1.0)
[30266.992000] NET: Unregistered protocol family 23
[30267.420000] ACPI: PCI interrupt for device 0000:00:0a.0 disabled
[30271.104000] 8139too Fast Ethernet driver 0.9.28
[30271.108000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[30271.112000] eth0: RealTek RTL8139 at 0xd09ac000, 00:40:f4:b3:e5:e3, IRQ 5
[30271.112000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[30271.260000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[30272.152000] input: Power Button (FF) as /class/input/input8
[30272.152000] ACPI: Power Button (FF) [PWRF]
[30272.156000] input: Power Button (CM) as /class/input/input9
[30272.156000] ACPI: Power Button (CM) [PWRB]
[30272.156000] input: Sleep Button (CM) as /class/input/input10
[30272.156000] ACPI: Sleep Button (CM) [SLPB]
[30273.504000] ACPI: Fan [FAN] (on)
[30273.632000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[30273.632000] ACPI: Processor [CPU0] (supports 2 throttling states)
[30273.640000] ACPI: Thermal Zone [THRM] (40 C)
[30287.236000] eth0: no IPv6 routers present
[75767.168000] UDF-fs: No VRS found
[75767.204000] ISO 9660 Extensions: Microsoft Joliet Level 3
[75767.244000] ISOFS: changing to secondary root
[76084.344000] UDF-fs: No VRS found
[76084.388000] ISO 9660 Extensions: Microsoft Joliet Level 3
[76084.388000] ISOFS: changing to secondary root
zygis@zygis-deskt taigi pas maneLinux version 2.6.22-14-generic ir t.t..[ 17.772000] /build/buildd/linux-ubuntu-modules-2.6.22-2.6.22/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
is sios eilutes, kaipir supratau,kad pas mane gspca draiveriai.ar as teisus ???

  • 28 Vas '09

toliau mansiulo patikrinti (Make sure you have the build-essential package as it is required) suvedu komanda sudo apt-get install build-essential rodo stai ka rodozygis@zygis-desktop:~$ sudo apt-get install build-essential
[sudo] password for zygis:
Reading package lists... Done
Building dependency tree
Reading state information... Done
build-essential is already the newest version.
The following packages were automatically installed and are no longer required:
libstdc++5 module-assistant libexif-gtk5 gnome-specimen gcc-3.3-base
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 305 not upgraded.
zygis@zygis-desktop:~$

  • 28 Vas '09

taigi is puslapio parsisiunciu draiverius (If you use the GSPCA driver:
Driver homepage: http://mxhaard.free.fr

Run
Code:) mataketutis pasirinkimus gspcav1-01.00.10.tar.gz gspca-20060930.tar.gz gspca-20060831.tar.gz Parent Directory .Pirmus tris įrasiau į kompa ir įkeliu skripta myrelease=uname -r
olddriver=locate -r "/$myrelease/.*gspca\.ko$"
sudo mv $olddriver "/home/$USER/gspca.old"ygis@zygis-desktop:~$ myrelease=uname -r
zygis@zygis-desktop:~$ olddriver=locate -r "/$myrelease/.*gspca\.ko$"
zygis@zygis-desktop:~$ sudo mv $olddriver "/home/$USER/gspca.old"
[sudo] password for zygis:
mv: missing destination file operand after /home/zygis/gspca.old' Bandykitemv --help', jei norite išsamesnės informacijos.
zygis@zygis-desktop:~$
STAI KA MAN RASO.KA AS DARU BLOGAI?

hmx
  • 28 Vas '09

pirma ivesk tokia komanda
sudo updatedb

toliau paeiliui ivesk tas pacias 3 komandas:
myrelease=uname -r
olddriver=locate -r "/$myrelease/.*gspca\.ko$"
sudo mv $olddriver "/home/zygis/gspca.old"

jeigu ismes ta pacia klaida ivesk
echo $myrelease
echo $olddriver
ir paziurek ka parasys,. Tavo klaida ismete kad pvz nerado kas yra irasyta $olddrive kintamajame rodos. Tai galejo pvz atsitikti del to kad locate komanda nepilnai galejo atlikti paieska. arba tiesiog nieko nerado. Tokiu atveju daryk ka toliau tas tutorialas tau sako, isarhyvuok tuos failus per terminala ieik i sukurtas direktorijas ir ivesk tas komandas.

  • 28 Vas '09

pabandziau net du kartus ,gal kaip tu saki neranda del to kad jie suapausti? [sudo] password for zygis:

zygis@zygis-desktop:~$
zygis@zygis-desktop:~$ myrelease=uname -r
zygis@zygis-desktop:~$ olddriver=locate -r "/$myrelease/.*gspca\.ko$"
zygis@zygis-desktop:~$ sudo mv $olddriver "/home/zygis/gspca.old"
mv: missing destination file operand after /home/zygis/gspca.old' Bandykitemv --help', jei norite išsamesnės informacijos.
zygis@zygis-desktop:~$ echo $myrelease
2.6.22-14-generic
zygis@zygis-desktop:~$ echo $olddriver

zygis@zygis-desktop:~$ sudo updatedb
myrelease=uname -r
zygis@zygis-desktop:~$ myrelease=uname -r
zygis@zygis-desktop:~$ olddriver=locate -r "/$myrelease/.*gspca\.ko$"
zygis@zygis-desktop:~$ sudo mv $olddriver "/home/zygis/gspca.old"
mv: missing destination file operand after /home/zygis/gspca.old' Bandykitemv --help', jei norite išsamesnės informacijos.
zygis@zygis-desktop:~$ echo $myrelease
2.6.22-14-generic
zygis@zygis-desktop:~$ echo $olddriver

zygis@zygis-desktop:~$

  • 28 Vas '09

gal galetum pasakyti kaip tuos failus iskleisti dabartine ju vieta darbastalis.as niekada linux sistemoje failu dar neiskleidinejau.tuolab nemoku ju iskleisti terminale.

hmx
  • 1 Kov '09

nueinam kur randasi tavo darbastalis
cd /home/zygis/Desktop
isarchyvuojam failus
tar xfvz gspcav1-20071224.tar.gz

Terminale ivairiu failu, direktoriju komandu uzbaigimui gali naudoti TAB klavisa, tai yra tarkim iejes i desktopa rasai tar xfvz gsp ir spaudi TAB klavisa. Toliau ieini i sukurta direktorija su cd komanda tarkim
cd gspcTAB**
ir toliau atlieki nurodytus veiksmus aprasyme. Pries tai dar gal reiktu instaliuoti kompiliavimo papildymus.

sudo apt-get install linux-headers-uname -r linux-restricted-modules-uname -r build-essential

ir komandos
sudo modprobe -r gspca; sudo make clean; sudo make; sudo make install
jei viskas gerai pavyko
sudo modprobe gspca

////////////////////////////////////////////////////////////

taciau pries tai galbut pabandyk grafini ideigimo buda.
https://help.ubuntu.com/community/EasyCam
be to dar siulyciau paskaityti kas cia parasyta
https://help.ubuntu.com/community/Spca5xx

  • 1 Kov '09

zygis@zygis-desktop:~$ cd /home/zygis/Desktop
zygis@zygis-desktop:~/Desktop$ ls
Aboard the quietest submarine in the world.FLV
application-browser.desktop
darbastaliai
firefox.desktop
gnomecc.desktop
gspca-20060831
gspca-20060831.tar.gz
gspca-20060930.tar.gz
gspcav1-01.00.10.tar.gz
gspcav1-20071224.tar.gz
How-To: Installing nVidia Drivers in Ubuntu 7.10.flv
install_core_fonts.desktop
youtube2
youtube3
youtube4
yutube
kaip instaliavau openarena.odt
linux
naujas failas~
PhoneUsage.pdf
rickos
spca5xx-v4l1goodbye.tar.gz
www.fm.lt_Ziniu-Radijas.m3u
zygis@zygis-desktop:~/Desktop$ tar xfvz gspcav1-20071224.tar.gz
gspcav1-20071224/
gspcav1-20071224/decoder/
gspcav1-20071224/decoder/gspcadecoder.c
gspcav1-20071224/decoder/gspcadecoder.h
gspcav1-20071224/decoder/gspcadecoder-OSX.c
gspcav1-20071224/decoder/gspcadecoder-OSX.h
gspcav1-20071224/Makefile
gspcav1-20071224/Vimicro/
gspcav1-20071224/Vimicro/vc032x_sensor.h
gspcav1-20071224/Vimicro/zc3xx.h
gspcav1-20071224/Vimicro/cs2102.h
gspcav1-20071224/Vimicro/vc032x.h
gspcav1-20071224/Vimicro/pas106b.h
gspcav1-20071224/Vimicro/icm105a.h
gspcav1-20071224/Vimicro/hv7131b.h
gspcav1-20071224/Vimicro/hv7131c.h
gspcav1-20071224/Vimicro/pb0330.h
gspcav1-20071224/Vimicro/ov7630c.h
gspcav1-20071224/Vimicro/mc501cb.h
gspcav1-20071224/Vimicro/tas5130c_vf0250.h
gspcav1-20071224/Vimicro/ov7620.h
gspcav1-20071224/Vimicro/tas5130c.h
gspcav1-20071224/Vimicro/hdcs2020.h
gspcav1-20071224/Etoms/
gspcav1-20071224/Etoms/et61xx51.h
gspcav1-20071224/Sonix/
gspcav1-20071224/Sonix/sn9cxxx.h
gspcav1-20071224/Sonix/sonix.h
gspcav1-20071224/utils/
gspcav1-20071224/utils/spcagamma.h
gspcav1-20071224/utils/spcausb.h
gspcav1-20071224/utils/spcaCompat.h
gspcav1-20071224/Conexant/
gspcav1-20071224/Conexant/cx11646.h
gspcav1-20071224/Conexant/cxlib.h
gspcav1-20071224/Pixart/
gspcav1-20071224/Pixart/pac207-OSX.h
gspcav1-20071224/Pixart/pac7311.h
gspcav1-20071224/Pixart/pac207.h
gspcav1-20071224/changelog
gspcav1-20071224/license
gspcav1-20071224/gspca_core.c
gspcav1-20071224/Transvision/
gspcav1-20071224/Transvision/tv8532.h
gspcav1-20071224/Makefile.kld
gspcav1-20071224/gspca.h
gspcav1-20071224/Sunplus/
gspcav1-20071224/Sunplus/spca501.dat
gspcav1-20071224/Sunplus/spca505.dat
gspcav1-20071224/Sunplus/spca508.dat
gspcav1-20071224/Sunplus/spca561-OSX.h
gspcav1-20071224/Sunplus/spca506.h
gspcav1-20071224/Sunplus/spca561.h
gspcav1-20071224/Sunplus/spca501_init.h
gspcav1-20071224/Sunplus/spca508_init-OSX.h
gspcav1-20071224/Sunplus/spca508_init.h
gspcav1-20071224/Sunplus/spca501_init-OSX.h
gspcav1-20071224/Sunplus/spca505_init.h
gspcav1-20071224/Sunplus-jpeg/
gspcav1-20071224/Sunplus-jpeg/spca500.dat
gspcav1-20071224/Sunplus-jpeg/jpeg_qtables.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.dat
gspcav1-20071224/Sunplus-jpeg/spca500_init.h
gspcav1-20071224/gspca_build
gspcav1-20071224/READ_AND_INSTALL
gspcav1-20071224/Mars-Semi/
gspcav1-20071224/Mars-Semi/mr97311.h
gspcav1-20071224/cutlog.py
zygis@zygis-desktop:~/Desktop$ tar xfvz gspca

KIEK SUPRANTU MAN REIK RASYTI NE tar xfvz gspc O tar xfvz gspca
IR PASPAUDUS tab niekas neyvyko

  • 1 Kov '09

kai paspadziau enter zygis@zygis-desktop:~/Desktop$ tar xfvz gspca
tar: gspca: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
zygis@zygis-desktop:~/Desktop$

  • 1 Kov '09

dar pabandysiu nepaziurejas desktop turinio,tai yra be komandos lszygis@zygis-desktop:~$ cd /home/zygis/Desktop
zygis@zygis-desktop:~/Desktop$ ls
Aboard the quietest submarine in the world.FLV
application-browser.desktop
darbastaliai
firefox.desktop
gnomecc.desktop
gspca-20060831
gspca-20060831.tar.gz
gspca-20060930.tar.gz
gspcav1-01.00.10.tar.gz
gspcav1-20071224.tar.gz
How-To: Installing nVidia Drivers in Ubuntu 7.10.flv
install_core_fonts.desktop
youtube2
youtube3
youtube4
yutube
kaip instaliavau openarena.odt
linux
naujas failas~
PhoneUsage.pdf
rickos
spca5xx-v4l1goodbye.tar.gz
www.fm.lt_Ziniu-Radijas.m3u
zygis@zygis-desktop:~/Desktop$ tar xfvz gspcav1-20071224.tar.gz
gspcav1-20071224/
gspcav1-20071224/decoder/
gspcav1-20071224/decoder/gspcadecoder.c
gspcav1-20071224/decoder/gspcadecoder.h
gspcav1-20071224/decoder/gspcadecoder-OSX.c
gspcav1-20071224/decoder/gspcadecoder-OSX.h
gspcav1-20071224/Makefile
gspcav1-20071224/Vimicro/
gspcav1-20071224/Vimicro/vc032x_sensor.h
gspcav1-20071224/Vimicro/zc3xx.h
gspcav1-20071224/Vimicro/cs2102.h
gspcav1-20071224/Vimicro/vc032x.h
gspcav1-20071224/Vimicro/pas106b.h
gspcav1-20071224/Vimicro/icm105a.h
gspcav1-20071224/Vimicro/hv7131b.h
gspcav1-20071224/Vimicro/hv7131c.h
gspcav1-20071224/Vimicro/pb0330.h
gspcav1-20071224/Vimicro/ov7630c.h
gspcav1-20071224/Vimicro/mc501cb.h
gspcav1-20071224/Vimicro/tas5130c_vf0250.h
gspcav1-20071224/Vimicro/ov7620.h
gspcav1-20071224/Vimicro/tas5130c.h
gspcav1-20071224/Vimicro/hdcs2020.h
gspcav1-20071224/Etoms/
gspcav1-20071224/Etoms/et61xx51.h
gspcav1-20071224/Sonix/
gspcav1-20071224/Sonix/sn9cxxx.h
gspcav1-20071224/Sonix/sonix.h
gspcav1-20071224/utils/
gspcav1-20071224/utils/spcagamma.h
gspcav1-20071224/utils/spcausb.h
gspcav1-20071224/utils/spcaCompat.h
gspcav1-20071224/Conexant/
gspcav1-20071224/Conexant/cx11646.h
gspcav1-20071224/Conexant/cxlib.h
gspcav1-20071224/Pixart/
gspcav1-20071224/Pixart/pac207-OSX.h
gspcav1-20071224/Pixart/pac7311.h
gspcav1-20071224/Pixart/pac207.h
gspcav1-20071224/changelog
gspcav1-20071224/license
gspcav1-20071224/gspca_core.c
gspcav1-20071224/Transvision/
gspcav1-20071224/Transvision/tv8532.h
gspcav1-20071224/Makefile.kld
gspcav1-20071224/gspca.h
gspcav1-20071224/Sunplus/
gspcav1-20071224/Sunplus/spca501.dat
gspcav1-20071224/Sunplus/spca505.dat
gspcav1-20071224/Sunplus/spca508.dat
gspcav1-20071224/Sunplus/spca561-OSX.h
gspcav1-20071224/Sunplus/spca506.h
gspcav1-20071224/Sunplus/spca561.h
gspcav1-20071224/Sunplus/spca501_init.h
gspcav1-20071224/Sunplus/spca508_init-OSX.h
gspcav1-20071224/Sunplus/spca508_init.h
gspcav1-20071224/Sunplus/spca501_init-OSX.h
gspcav1-20071224/Sunplus/spca505_init.h
gspcav1-20071224/Sunplus-jpeg/
gspcav1-20071224/Sunplus-jpeg/spca500.dat
gspcav1-20071224/Sunplus-jpeg/jpeg_qtables.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.dat
gspcav1-20071224/Sunplus-jpeg/spca500_init.h
gspcav1-20071224/gspca_build
gspcav1-20071224/READ_AND_INSTALL
gspcav1-20071224/Mars-Semi/
gspcav1-20071224/Mars-Semi/mr97311.h
gspcav1-20071224/cutlog.py
zygis@zygis-desktop:~/Desktop$ tar xfvz gspca
tar: gspca: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
zygis@zygis-desktop:~/Desktop$ cd /home/zygis/Desktop
zygis@zygis-desktop:~/Desktop$ tar xfvz gspcav1-20071224.tar.gz
gspcav1-20071224/
gspcav1-20071224/decoder/
gspcav1-20071224/decoder/gspcadecoder.c
gspcav1-20071224/decoder/gspcadecoder.h
gspcav1-20071224/decoder/gspcadecoder-OSX.c
gspcav1-20071224/decoder/gspcadecoder-OSX.h
gspcav1-20071224/Makefile
gspcav1-20071224/Vimicro/
gspcav1-20071224/Vimicro/vc032x_sensor.h
gspcav1-20071224/Vimicro/zc3xx.h
gspcav1-20071224/Vimicro/cs2102.h
gspcav1-20071224/Vimicro/vc032x.h
gspcav1-20071224/Vimicro/pas106b.h
gspcav1-20071224/Vimicro/icm105a.h
gspcav1-20071224/Vimicro/hv7131b.h
gspcav1-20071224/Vimicro/hv7131c.h
gspcav1-20071224/Vimicro/pb0330.h
gspcav1-20071224/Vimicro/ov7630c.h
gspcav1-20071224/Vimicro/mc501cb.h
gspcav1-20071224/Vimicro/tas5130c_vf0250.h
gspcav1-20071224/Vimicro/ov7620.h
gspcav1-20071224/Vimicro/tas5130c.h
gspcav1-20071224/Vimicro/hdcs2020.h
gspcav1-20071224/Etoms/
gspcav1-20071224/Etoms/et61xx51.h
gspcav1-20071224/Sonix/
gspcav1-20071224/Sonix/sn9cxxx.h
gspcav1-20071224/Sonix/sonix.h
gspcav1-20071224/utils/
gspcav1-20071224/utils/spcagamma.h
gspcav1-20071224/utils/spcausb.h
gspcav1-20071224/utils/spcaCompat.h
gspcav1-20071224/Conexant/
gspcav1-20071224/Conexant/cx11646.h
gspcav1-20071224/Conexant/cxlib.h
gspcav1-20071224/Pixart/
gspcav1-20071224/Pixart/pac207-OSX.h
gspcav1-20071224/Pixart/pac7311.h
gspcav1-20071224/Pixart/pac207.h
gspcav1-20071224/changelog
gspcav1-20071224/license
gspcav1-20071224/gspca_core.c
gspcav1-20071224/Transvision/
gspcav1-20071224/Transvision/tv8532.h
gspcav1-20071224/Makefile.kld
gspcav1-20071224/gspca.h
gspcav1-20071224/Sunplus/
gspcav1-20071224/Sunplus/spca501.dat
gspcav1-20071224/Sunplus/spca505.dat
gspcav1-20071224/Sunplus/spca508.dat
gspcav1-20071224/Sunplus/spca561-OSX.h
gspcav1-20071224/Sunplus/spca506.h
gspcav1-20071224/Sunplus/spca561.h
gspcav1-20071224/Sunplus/spca501_init.h
gspcav1-20071224/Sunplus/spca508_init-OSX.h
gspcav1-20071224/Sunplus/spca508_init.h
gspcav1-20071224/Sunplus/spca501_init-OSX.h
gspcav1-20071224/Sunplus/spca505_init.h
gspcav1-20071224/Sunplus-jpeg/
gspcav1-20071224/Sunplus-jpeg/spca500.dat
gspcav1-20071224/Sunplus-jpeg/jpeg_qtables.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.h
gspcav1-20071224/Sunplus-jpeg/sp5xxfw2.dat
gspcav1-20071224/Sunplus-jpeg/spca500_init.h
gspcav1-20071224/gspca_build
gspcav1-20071224/READ_AND_INSTALL
gspcav1-20071224/Mars-Semi/
gspcav1-20071224/Mars-Semi/mr97311.h
gspcav1-20071224/cutlog.py
zygis@zygis-desktop:~/Desktop$ tar xfvz gsp
tar: gsp: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
zygis@zygis-desktop:~/Desktop$
ar: Error exit delayed from previous errors KAS CIA PER KLAIDA

  • 1 Kov '09

CIA PABANDZIAU KAIP RASIAI tar xfvz gsp

hmx
  • 1 Kov '09

nu zmogau su tavim sunku
visu pirma tu jau isarchvavai ta archyva parases tar xfvz gspcav1-20071224.tar.gz, ir tai atlikai rodos net 3 kartus. Kam tu dar bandai rasyti tar xfvz gsp as nesuprantu nes rodos tokios komandos as nerasiau isvis.O rasiau kitomis spalvomis ne pacia komanda o klavisus, kad lengviau butu suprasti tai yra cia buvo palengvinimas tau. Tai reiske kad terminala rasai tar xfvz gsp ir spaudi ne ENTER klavisa o TAB klavisa kuris turejo tau gsp paversti i gspcav1-20071224.tar.gz ir tik tada spausti ENTER klavisa.

Ok tolesni etapai: ieini dabar i sukurta direktorija
cd /home/zygis/Desktop/gspcav1-20071224/
ir toliau... ka reikia daryti parasiau.

TACIAU PIRMA PASKAITYK GRAFINI IDIEGIMO BUDA NES CIA KUO TOLIAU I MISKA TUO DAUGIAU PARTIZANU TU SUTIKSI SU KOMPILIAVIMU