Prisijungti

Skype nerodo mano web kamera

Giedrius JociusGiedrius Jocius
  • 16 Bir '10

Sveiki, ką tik instaliavau Ubuntu 10.04 ir Skype. Neveikia mano kamera, jei ją taip galima pavadinti. Gile WA-008. Jei paleidžiu iš Ubuntu, tai kamera veikia, Skype - ne. Gal kam nors teko susidurti su tokia problema?

  • 16 Bir '10

simta kart aptarta situacija. nepatingek forumo paieska pasinaudot.

Giedrius JociusGiedrius Jocius
  • 18 Bir '10

@neblogas rašė:
simta kart aptarta situacija. nepatingek forumo paieska pasinaudot.

Priskaičiau visokių dalykų, bet per žema mano kvalifikacija, nesuprantu apie kokius kodus kalbama ir kokias komandas.
Gal galėtum kaip visiškam pradžiamoksliui patarti kaip galima išspręsti šitą problemą?

  • 18 Bir '10

Pažiūrėk Skype nustatymuose > vaizdo įrenginiai>pasirinkti kamerą. Greičiausia web-kamera bus /dev/video1.

Giedrius JociusGiedrius Jocius
  • 18 Bir '10

@Vladasl rašė:
Pažiūrėk Skype nustatymuose > vaizdo įrenginiai>pasirinkti kamerą. Greičiausia web-kamera bus /dev/video1.

Pas mane kamera /dev/video 0, ir nieko daugiau nesiūlo į ką pasikeisti.

  • 18 Bir '10

Pajung web kamera, tada terminale;

dmesg

Atpostink, ką rašo gale dėl uvcvideo ar /dev/video0.
Po to.

lsusb

Ir čia neaišku

Jei paleidžiu iš Ubuntu, tai kamera veikia, Skype - ne.

Iš ubuntu tai čia su kokią kitą programą?

  • 18 Bir '10

jam reikia to LD_PRELOAD

  • 18 Bir '10

@neblogas rašė:
jam reikia to LD_PRELOAD

Na tada
http://www.binaryworld.skynet.lt/DUK.ht ... das-zalias

Giedrius JociusGiedrius Jocius
  • 21 Bir '10

@Vladasl rašė:
Pajung web kamera, tada terminale;

dmesg

Atpostink, ką rašo gale dėl uvcvideo ar /dev/video0.
Po to.

lsusb

Ir čia neaišku

Jei paleidžiu iš Ubuntu, tai kamera veikia, Skype - ne.

Iš ubuntu tai čia su kokią kitą programą?

Nukopijavau visą tekstą:
)
[ 0.185937] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
[ 0.186010] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10
11 12 14 15)
[ 0.186082] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled.
[ 0.186155] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
0, disabled.
[ 0.186227] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled.
[ 0.186300] ACPI: PCI Interrupt Link [LNK1] (IRQs
3 4 5 6 7 9 10 11 12 14 15)
[ 0.186389] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.186391] vgaarb: loaded
[ 0.186482] SCSI subsystem initialized
[ 0.186557] libata version 3.00 loaded.
[ 0.186617] usbcore: registered new interface driver usbfs
[ 0.186628] usbcore: registered new interface driver hub
[ 0.186648] usbcore: registered new device driver usb
[ 0.186739] ACPI: WMI: Mapper loaded
[ 0.186740] PCI: Using ACPI for IRQ routing
[ 0.186855] NetLabel: Initializing
[ 0.186857] NetLabel: domain hash size = 128
[ 0.186858] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.186868] NetLabel: unlabeled traffic allowed by default
[ 0.186893] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.186897] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.192033] Switching to clocksource tsc
[ 0.193612] AppArmor: AppArmor Filesystem Enabled
[ 0.193622] pnp: PnP ACPI init
[ 0.193633] ACPI: bus type pnp registered
[ 0.195668] pnp: PnP ACPI: found 15 devices
[ 0.195670] ACPI: ACPI bus type pnp unregistered
[ 0.195674] PnPBIOS: Disabled by ACPI PNP
[ 0.195682] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.195685] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.195687] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.195689] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.195691] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.195699] system 00:0b: ioport range 0x400-0x4bf could not be reserved
[ 0.195704] system 00:0c: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.195709] system 00:0d: iomem range 0xcdc00-0xcffff has been reserved
[ 0.195711] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.195713] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.195715] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.195717] system 00:0d: iomem range 0xbfee0000-0xbfefffff could not be reserved
[ 0.195719] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.195721] system 00:0d: iomem range 0x100000-0xbfedffff could not be reserved
[ 0.195724] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.195726] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.195728] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.195730] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.195733] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.195735] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.195737] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.230406] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.230410] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.230413] pci 0000:00:01.0: MEM window: 0xe0000000-0xe3ffffff
[ 0.230416] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.230420] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.230422] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.230426] pci 0000:00:1c.0: MEM window: 0xe5200000-0xe53fffff
[ 0.230429] pci 0000:00:1c.0: PREFETCH window: 0x000000e5400000-0x000000e55fffff
[ 0.230435] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.230437] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.230441] pci 0000:00:1c.1: MEM window: 0xe4000000-0xe4ffffff
[ 0.230445] pci 0000:00:1c.1: PREFETCH window: 0x000000e5000000-0x000000e50fffff
[ 0.230449] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 0.230452] pci 0000:00:1e.0: IO window: 0xa000-0xafff
[ 0.230456] pci 0000:00:1e.0: MEM window: disabled
[ 0.230459] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.230472] alloc irq_desc for 16 on node -1
[ 0.230474] alloc kstat_irqs on node -1
[ 0.230480] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.230484] pci 0000:00:01.0: setting latency timer to 64
[ 0.230492] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.230495] pci 0000:00:1c.0: setting latency timer to 64
[ 0.230501] alloc irq_desc for 17 on node -1
[ 0.230503] alloc kstat_irqs on node -1
[ 0.230505] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.230509] pci 0000:00:1c.1: setting latency timer to 64
[ 0.230514] pci 0000:00:1e.0: setting latency timer to 64
[ 0.230518] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.230519] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.230522] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.230523] pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.230525] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.230527] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.230529] pci_bus 0000:02: resource 1 mem: [0xe5200000-0xe53fffff]
[ 0.230531] pci_bus 0000:02: resource 2 pref mem [0xe5400000-0xe55fffff]
[ 0.230533] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.230535] pci_bus 0000:03: resource 1 mem: [0xe4000000-0xe4ffffff]
[ 0.230537] pci_bus 0000:03: resource 2 pref mem [0xe5000000-0xe50fffff]
[ 0.230539] pci_bus 0000:04: resource 0 io: [0xa000-0xafff]
[ 0.230540] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.230542] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.230574] NET: Registered protocol family 2
[ 0.230662] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.230908] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.231286] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.231486] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.231488] TCP reno registered
[ 0.231551] NET: Registered protocol family 1
[ 0.231677] pci 0000:01:00.0: Boot video device
[ 0.231829] cpufreq-nforce2: No nForce2 chipset.
[ 0.231851] Scanning for low memory corruption every 60 seconds
[ 0.231937] audit: initializing netlink socket (disabled)
[ 0.231948] type=2000 audit(1277131563.231:1): initialized
[ 0.239840] highmem bounce pool size: 64 pages
[ 0.239844] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.240930] VFS: Disk quotas dquot_6.5.2
[ 0.240973] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.241403] fuse init (API version 7.13)
[ 0.241469] msgmni has been set to 1615
[ 0.241632] alg: No test for stdrng (krng)
[ 0.241673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.241676] io scheduler noop registered
[ 0.241677] io scheduler anticipatory registered
[ 0.241679] io scheduler deadline registered
[ 0.241707] io scheduler cfq registered (default)
[ 0.241808] alloc irq_desc for 24 on node -1
[ 0.241809] alloc kstat_irqs on node -1
[ 0.241816] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.241821] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.241897] alloc irq_desc for 25 on node -1
[ 0.241898] alloc kstat_irqs on node -1
[ 0.241904] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.241910] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.242002] alloc irq_desc for 26 on node -1
[ 0.242004] alloc kstat_irqs on node -1
[ 0.242009] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
[ 0.242016] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.242085] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.242142] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.242212] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.242215] ACPI: Power Button [PWRB]
[ 0.242257] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.242259] ACPI: Power Button [PWRF]
[ 0.242628] ACPI: SSDT bfee74c0 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.242774] processor LNXCPU:00: registered as cooling_device0
[ 0.242924] ACPI: SSDT bfee7980 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.243299] processor LNXCPU:01: registered as cooling_device1
[ 0.244731] isapnp: Scanning for PnP cards...
[ 0.245705] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.245791] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.246081] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.246909] brd: module loaded
[ 0.247257] loop: module loaded
[ 0.247318] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.247395] ata_piix 0000:00:1f.2: version 2.13
[ 0.247407] alloc irq_desc for 19 on node -1
[ 0.247408] alloc kstat_irqs on node -1
[ 0.247412] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.247416] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 0.247443] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.259846] scsi0 : ata_piix
[ 0.303787] scsi1 : ata_piix
[ 0.304349] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.304351] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.304612] Fixed MDIO Bus: probed
[ 0.304640] PPP generic driver version 2.4.2
[ 0.304686] tun: Universal TUN/TAP device driver, 1.6
[ 0.304687] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 0.304764] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.304784] alloc irq_desc for 23 on node -1
[ 0.304785] alloc kstat_irqs on node -1
[ 0.304791] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.304806] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.304809] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.304832] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.304846] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.308730] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.308745] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe5104000
[ 0.323863] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.323954] usb usb1: configuration #1 chosen from 1 choice
[ 0.323976] hub 1-0:1.0: USB hub found
[ 0.323982] hub 1-0:1.0: 8 ports detected
[ 0.324035] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.324047] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.324079] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.324086] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.324089] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.324113] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.324134] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 0.324197] usb usb2: configuration #1 chosen from 1 choice
[ 0.324218] hub 2-0:1.0: USB hub found
[ 0.324223] hub 2-0:1.0: 2 ports detected
[ 0.324256] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.324260] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.324262] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.324286] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.324312] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[ 0.324376] usb usb3: configuration #1 chosen from 1 choice
[ 0.324394] hub 3-0:1.0: USB hub found
[ 0.324399] hub 3-0:1.0: 2 ports detected
[ 0.324432] alloc irq_desc for 18 on node -1
[ 0.324434] alloc kstat_irqs on node -1
[ 0.324438] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.324442] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.324444] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.324466] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.324491] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[ 0.324559] usb usb4: configuration #1 chosen from 1 choice
[ 0.324581] hub 4-0:1.0: USB hub found
[ 0.324586] hub 4-0:1.0: 2 ports detected
[ 0.324616] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.324620] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.324623] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.324646] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.324670] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[ 0.324733] usb usb5: configuration #1 chosen from 1 choice
[ 0.324751] hub 5-0:1.0: USB hub found
[ 0.324756] hub 5-0:1.0: 2 ports detected
[ 0.324828] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.325503] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.325508] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.325563] mice: PS/2 mouse device common for all mice
[ 0.325647] rtc_cmos 00:04: RTC can wake from S4
[ 0.325676] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.325697] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.325770] device-mapper: uevent: version 1.0.3
[ 0.327705] Freeing initrd memory: 7731k freed
[ 0.330543] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.330616] device-mapper: multipath: version 1.1.0 loaded
[ 0.330619] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.330714] EISA: Probing bus 0 at eisa.0
[ 0.330741] EISA: Detected 0 cards.
[ 0.330796] cpuidle: using governor ladder
[ 0.330797] cpuidle: using governor menu
[ 0.331163] TCP cubic registered
[ 0.331277] NET: Registered protocol family 10
[ 0.331639] lo: Disabled Privacy Extensions
[ 0.331914] NET: Registered protocol family 17
[ 0.333741] Using IPI No-Shortcut mode
[ 0.333832] PM: Resume from disk failed.
[ 0.333842] registered taskstats version 1
[ 0.334073] Magic number: 14:298:789
[ 0.334134] rtc_cmos 00:04: setting system clock to 2010-06-21 14:46:03 UTC (1277131563)
[ 0.334136] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.334137] EDD information not available.
[ 0.439086] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.500156] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S202N, SB02, max UDMA/66
[ 0.500252] ata1.00: HPA unlocked: 976771055 -> 976773168, native 976773168
[ 0.500255] ata1.00: ATA-8: WDC WD5000AAKS-22A7B0, 01.03B01, max UDMA/133
[ 0.500257] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.516056] ata2.00: configured for UDMA/66
[ 0.516759] ata1.00: configured for UDMA/133
[ 0.598614] isapnp: No Plug & Play device found
[ 0.598707] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5
[ 0.598793] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.598797] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.598827] sd 0:0:0:0: [sda] Write Protect is off
[ 0.598829] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.598933] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.599032] sda:
[ 0.599418] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S202N SB02 PQ: 0 ANSI: 5
[ 0.602869] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.602873] Uniform CD-ROM driver Revision: 3.20
[ 0.602965] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.602995] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 0.615834] sda1 sda2 < sda5
[ 0.635729] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.648380] sda6 >
[ 0.648606] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.648617] Freeing unused kernel memory: 672k freed
[ 0.648840] Write protecting the kernel text: 4828k
[ 0.648895] Write protecting the kernel read-only data: 1876k
[ 0.660743] udev: starting version 151
[ 0.705979] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.705995] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.706026] r8169 0000:03:00.0: setting latency timer to 64
[ 0.706065] alloc irq_desc for 27 on node -1
[ 0.706066] alloc kstat_irqs on node -1
[ 0.706078] r8169 0000:03:00.0: irq 27 for MSI/MSI-X
[ 0.706562] eth0: RTL8168c/8111c at 0xf8252000, 00:1f:d0:13:34:8c, XID 1c4000c0 IRQ 27
[ 0.768644] usb 1-2: configuration #1 chosen from 1 choice
[ 0.879683] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 0.999252] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 1.060385] usb 1-4: configuration #1 chosen from 1 choice
[ 1.172015] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 1.305630] usb 1-5: configuration #1 chosen from 1 choice
[ 1.656016] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 1.885784] usb 5-2: configuration #1 chosen from 1 choice
[ 7.799502] udev: starting version 151
[ 7.816568] Adding 7417848k swap on /dev/sda6. Priority:-1 extents:1 across:7417848k
[ 7.832651] Linux agpgart interface v0.103
[ 7.980496] intel_rng: FWH not detected
[ 7.995595] lp: driver loaded but no devices found
[ 8.001065] [drm] Initialized drm 1.1.0 20060810
[ 8.007625] type=1505 audit(1277120771.169:2): operation="profile_load" pid=653 name="/sbin/dhclient3"
[ 8.008133] type=1505 audit(1277120771.173:3): operation="profile_load" pid=653 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.008404] type=1505 audit(1277120771.173:4): operation="profile_load" pid=653 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.010038] Linux video capture interface: v2.00
[ 8.012689] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04E8 pid 0x342E
[ 8.012704] usbcore: registered new interface driver usblp
[ 8.013845] gspca: main v2.7.0 registered
[ 8.014672] gspca: probing 093a:2460
[ 8.016963] Initializing USB Mass Storage driver...
[ 8.017622] pac207: Pixart Sensor ID 0x27 Chips ID 0x08
[ 8.017624] pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2460)
[ 8.019663] gspca: probe ok
[ 8.019678] usbcore: registered new interface driver pac207
[ 8.019680] pac207: registered
[ 8.023490] parport_pc 00:08: reported by Plug and Play ACPI
[ 8.023533] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.024171] scsi2 : SCSI emulation for USB Mass Storage devices
[ 8.024778] usbcore: registered new interface driver usb-storage
[ 8.024780] USB Mass Storage support registered.
[ 8.030519] usb-storage: device found at 3
[ 8.030521] usb-storage: waiting for device to settle before scanning
[ 8.033873] ppdev: user-space parallel port driver
[ 8.065878] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.065882] nouveau 0000:01:00.0: setting latency timer to 64
[ 8.070656] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094100a1)
[ 8.071187] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 8.112730] lp0: using parport0 (interrupt-driven).
[ 8.118436] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 8.118440] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 8.118442] [drm] nouveau 0000:01:00.0: Bios version 62.94.11.00
[ 8.118445] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 8.118447] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 8.118450] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[ 8.118453] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 8.118455] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 8.118457] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 8.118459] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
[ 8.118461] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
[ 8.118463] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
[ 8.118466] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
[ 8.118468] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
[ 8.118469] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
[ 8.118471] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
[ 8.118478] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE32
[ 8.138338] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.138355] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.159481] usbcore: registered new interface driver cdc_ether
[ 8.168680] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD21B
[ 8.184513] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE176
[ 8.184524] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE2A5
[ 8.192079] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE4B5
[ 8.192087] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE51A
[ 8.212633] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 8.216406] [drm] nouveau 0000:01:00.0: 0xE51A: Condition still not met after 20ms, skipping following opcodes
[ 8.216417] [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
[ 8.216420] [drm] nouveau 0000:01:00.0: 0xBE26: parsing output script 0
[ 8.216422] [drm] nouveau 0000:01:00.0: 0xA862: parsing output script 0
[ 8.260601] rndis_host 1-2:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47
[ 8.274828] type=1505 audit(1277120771.437:5): operation="profile_load" pid=809 name="/usr/share/gdm/guest-session/Xsession"
[ 8.276099] type=1505 audit(1277120771.441:6): operation="profile_replace" pid=810 name="/sbin/dhclient3"
[ 8.276646] type=1505 audit(1277120771.441:7): operation="profile_replace" pid=810 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 8.276923] type=1505 audit(1277120771.441:8): operation="profile_replace" pid=810 name="/usr/lib/connman/scripts/dhclient-script"
[ 8.279301] type=1505 audit(1277120771.441:9): operation="profile_load" pid=811 name="/usr/bin/evince"
[ 8.290147] [TTM] Zone kernel: Available graphics memory: 417752 kiB.
[ 8.290149] [TTM] Zone highmem: Available graphics memory: 2058652 kiB.
[ 8.290157] [drm] nouveau 0000:01:00.0: 512 MiB VRAM
[ 8.293434] type=1505 audit(1277120771.457:10): operation="profile_load" pid=811 name="/usr/bin/evince-previewer"
[ 8.298830] psmouse serio1: ID: 10 00 64
[ 8.305394] eth1: register 'rndis_host' at usb-0000:00:1d.7-2, RNDIS device, 80:00:60:0f:e8:00
[ 8.305416] usbcore: registered new interface driver rndis_host
[ 8.309135] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 8.313215] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 8.313381] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 8.315522] r8169: eth0: link up
[ 8.315528] r8169: eth0: link up
[ 8.318118] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 8.318532] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 8.318534] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 8.318536] [drm] nouveau 0000:01:00.0: Detected a DAC output
[ 8.318538] [drm] nouveau 0000:01:00.0: Detected a TMDS output
[ 8.318540] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 8.318543] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 8.318752] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
[ 8.319557] type=1505 audit(1277120771.481:11): operation="profile_load" pid=811 name="/usr/bin/evince-thumbnailer"
[ 8.350761] cfg80211: Calling CRDA to update world regulatory domain
[ 8.470152] cfg80211: World regulatory domain updated:
[ 8.470155] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.470157] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.470159] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.470161] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 8.470163] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.470165] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 8.513884] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x40250000, bo f2e25800
[ 8.513972] fb0: nouveaufb frame buffer device
[ 8.513974] registered panic notifier
[ 8.513979] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 8.515765] vga16fb: initializing
[ 8.515767] vga16fb: mapped to 0xc00a0000
[ 8.515770] vga16fb: not registering due to another framebuffer present
[ 8.523327] [drm] nouveau 0000:01:00.0: 0x1121: parsing clock script 0
[ 8.524219] Console: switching to colour frame buffer device 210x65
[ 8.526615] usbcore: registered new interface driver rndis_wlan
[ 8.860469] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 8.907036] CPU0 attaching NULL sched-domain.
[ 8.907040] CPU1 attaching NULL sched-domain.
[ 8.932077] CPU0 attaching sched-domain:
[ 8.932087] domain 0: span 0-1 level MC
[ 8.932089] groups: 0 1
[ 8.932093] CPU1 attaching sched-domain:
[ 8.932095] domain 0: span 0-1 level MC
[ 8.932096] groups: 1 0
[ 9.199537] usb 1-5: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 9.530175] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 9.533955] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 11.299979] CPU0 attaching NULL sched-domain.
[ 11.299984] CPU1 attaching NULL sched-domain.
[ 11.320079] CPU0 attaching sched-domain:
[ 11.320082] domain 0: span 0-1 level MC
[ 11.320085] groups: 0 1
[ 11.320089] CPU1 attaching sched-domain:
[ 11.320091] domain 0: span 0-1 level MC
[ 11.320093] groups: 1 0
[ 13.033851] usb-storage: device scan complete
[ 13.038061] scsi 2:0:0:0: Direct-Access Generic Flash HS-CF 3.95 PQ: 0 ANSI: 0
[ 13.041819] scsi 2:0:0:1: Direct-Access Generic Flash HS-MS 3.95 PQ: 0 ANSI: 0
[ 13.045945] scsi 2:0:0:2: Direct-Access Generic Flash HS-SM 3.95 PQ: 0 ANSI: 0
[ 13.049445] scsi 2:0:0:3: Direct-Access Generic Flash HS-SD/MMC 3.95 PQ: 0 ANSI: 0
[ 13.049829] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 13.050114] sd 2:0:0:1: Attached scsi generic sg3 type 0
[ 13.050219] sd 2:0:0:2: Attached scsi generic sg4 type 0
[ 13.050318] sd 2:0:0:3: Attached scsi generic sg5 type 0
[ 13.170807] sd 2:0:0:2: [sdd] Attached SCSI removable disk
[ 13.229313] sd 2:0:0:1: [sdc] Attached SCSI removable disk
[ 13.242798] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 13.255803] sd 2:0:0:3: [sde] Attached SCSI removable disk
[ 18.376006] eth0: no IPv6 routers present
[ 19.152006] eth1: no IPv6 routers present
[ 40.850823] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 1223.397291] usb 1-2: USB disconnect, address 2
[ 1223.397488] eth1: unregister 'rndis_host' usb-0000:00:1d.7-2, RNDIS device
[ 3413.878293] usb 1-2: new high speed USB device using ehci_hcd and address 6
[ 3414.013119] usb 1-2: configuration #1 chosen from 1 choice
[ 3414.091364] rndis_host 1-2:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47
[ 3414.131933] eth1: register 'rndis_host' at usb-0000:00:1d.7-2, RNDIS device, 80:00:60:0f:e8:00
[ 3424.520010] eth1: no IPv6 routers present
[ 3447.422354] usb 1-2: USB disconnect, address 6
[ 3447.422568] eth1: unregister 'rndis_host' usb-0000:00:1d.7-2, RNDIS device
giedrius@giedrius-desktop:~$
Čia po pirmos komandos.
O kitas po antros:
giedrius@giedrius-desktop:~$ lsusb
Bus 005 Device 002: ID 093a:2460 Pixart Imaging, Inc. Q-TEC WEBCAM 100
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04e8:342e Samsung Electronics Co., Ltd
Bus 001 Device 003: ID 0424:2228 Standard Microsystems Corp. 9-in-2 Card Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
giedrius@giedrius-desktop:~$

Giedrius JociusGiedrius Jocius
  • 21 Bir '10

@Vladasl rašė:

@neblogas rašė:
jam reikia to LD_PRELOAD

Na tada
http://www.binaryworld.skynet.lt/DUK.ht ... das-zalias

Pabandžiau ir iš šito puslapio, nepadėjo.

Giedrius JociusGiedrius Jocius
  • 21 Bir '10

@Giedrius Jocius rašė:

@Vladasl rašė:

@neblogas rašė:
jam reikia to LD_PRELOAD

Na tada
http://www.binaryworld.skynet.lt/DUK.ht ... das-zalias

Pabandžiau ir iš šito puslapio, nepadėjo.

PADĖJO !!!
Labai ačiū už pagalbą.
Gal aš kur kitur gyvenime padėsiu

Giedrius JociusGiedrius Jocius
  • 20 Lie '10

Na tada
http://www.binaryworld.skynet.lt/DUK.ht ... das-zalias

Pabandžiau ir iš šito puslapio, nepadėjo.
PADĖJO !!!
Labai ačiū už pagalbą.
Gal aš kur kitur gyvenime padėsiu

Padėjo, bet laikinai. Nežinau, kur padariau klaidą, bet kamera neberodo perkrovus kompiuterį. Reikia arba išinstaliuoti ir vėl instaliuoti skype, arba kartoti viršuje aprašytus veiksmus. Ką čia reiktų padaryti, kad skype "prisimintų" kameros nustatymus?

  • 20 Lie '10

turiu beda prasau pagalbos Ubuntu 10,04 LTS beda su skypo vaidu padariau kaip aprasyta forume padejo kol isjungiau ,ijungus vel rodo tik juoda vaizda,o programa paleidus per komandine eilute su vaizdu viskas gerai ,kame riaples kazin

Giedrius JociusGiedrius Jocius
  • 25 Lie '10

@sprindiss rašė:
turiu beda prasau pagalbos Ubuntu 10,04 LTS beda su skypo vaidu padariau kaip aprasyta forume padejo kol isjungiau ,ijungus vel rodo tik juoda vaizda,o programa paleidus per komandine eilute su vaizdu viskas gerai ,kame riaples kazin

Gal visi atostogauja, kad niekas neparašo? O gal nežinia, kaip čia padaryti ir ko trūksta?

  • 26 Lie '10

ir man kyla toks itarimas

  • 26 Lie '10

Gal visi atostogauja, kad niekas neparašo?

Na aš tik vakar grįžau

o programa paleidus per komandine eilute su vaizdu viskas gerai ,kame riaples kazin

Tai ir pridėk skype's paleidimo ženkliukui komandą tą su kuria veikia
terminale alacarte ir eini internetas-skype-savybės
http://img843.imageshack.us/img843/8571/nuotrauka1.png

  • 16 Rugp '10

Jokiu terminalu ir kitokiu nesamoniu nereikia bent jau man.
Paprasciausei nueini i Skypes nustatymus ir per Video Devices uzmeti varnele ant Enable Skype Video ir pazimi taska ant Only People I Have Allowed ir viskas tuomet pratestuoji ar veikia kamera ir Vuolia. Tik kai kalbesi su draugu pats galesi nustatyti ar Pajunkti kamera ar ne.

  • 11 Bir

Cialis En Generique Fiable [url=https://viacialisns.com/]buying generic cialis online safe[/url] cialis number of orgasms <a href=https://viacialisns.com/#>buy cialis cheap</a> Cephalexin Generic

  • 28 Bir

precio viagra 50 mg https://cheapcialisll.com/ - Cialis cialis daily dose pharmacy <a href=https://cheapcialisll.com/#>Cialis</a> Propecia Doses

Atsakyti